Pipa PVC & Fitting
Untuk mencapai hasil yang memuaskan, kususnya dalam hal pemipaan pada sebuah proyek yang menggunakan pipa PVC, dalam pemilihan material harus diperhatikan fungsi saluran instalasi disesuaikan dengan klasifikasi pipa PVC yang akan digunakan. Adapun beberapa standard pipa PVC yang kerap kali ditentukan untuk menjadi spek pada sebuah proyek adalah:
- Standard pabrik.
- Standard JIS.
- Standard SNI.
Pipa PVC & CPVC Industrial GF Harvel
GF Harvel PVC Industrial Pipe Sch.80
Application
GF Harvel PVC corrosion resistant pressure pipe, IPS sizes 1/8″ through 24″, is ideal for use in applications with temperatures up to and including 140°F. Pressure rating (120 psi to 1230 psi) varies with schedule, pipe size, and temperature. It is generally resistant to most acids, bases, salts, aliphatic solutions, oxidants, and halogens. Chemical resistance data is available and should be referenced for proper material selection. GF Harvel PVC pipe exhibits excellent physical properties and flammability characteristics. Typical applications include: chemical processing, plating, high purity applications, potable water systems, water and wastewater treatment, irrigation, agricultural, and other industrial applications involving corrosive fluid transfer.
Sample Specification
All PVC Schedule 80 pipe shall be manufactured from a Type I, Grade I Polyvinyl Chloride (PVC) compound with a Cell Classification of 12454 per ASTM D1784. The pipe shall be manufactured in strict compliance to ASTM D1785, consistently meeting and/or exceeding the Quality Assurance test requirements of this standard with regard to material, workmanship, burst pressure, flattening, and extrusion quality. The pipe shall be manufactured in the USA, using domestic materials, by an ISO 9001 certified manufacturer. Standard lengths of pipe sizes 6″ and larger shall be beveled each end by the pipe manufacturer. All pipe shall be stored indoors after production at the manufacturing site until shipped from factory. This pipe shall carry the National Sanitation Foundation (NSF) seal of approval for potable water applications. All pipe shall be manufactured by GF Harvel.® PLASTICS, INC
GF Harvel CPVC Industrial Pipe Sch.80
Aplication
Corrosion resistant pressure pipe, IPS sizes 1/4″ through 24″, for use at temperatures up to and including 200°F. Pressure rating (130 psi to 1130 psi) varies with schedule, pipe size, and temperature as stated in GF Harvel engineering bulletin (Product Bulletin 112/401). Generally resistant to most acids, bases, salts, aliphatic solutions, oxidants, and halogens. Chemical resistance data is available and should be referenced for proper material selection. Pipe exhibits excellent physical properties and flammability characteristics (independently tested flame and smoke characteristics- ULC,1993). Typical applications include: chemical processing, plating, high purity applications, hot and cold potable water systems, water and wastewater treatment, and other industrial applications involving hot corrosive fluid transfer.
Schedule 80 Dimensions
| Nom. Pipe Size (in) | O.D. | Average I.D. | Min. Wall | Nom. Wt./Ft. | Max. W.P. PSI** |
|---|---|---|---|---|---|
| 1/8″ | .405 | .195 | 0.095 | 0.063 | 1230 |
| 1/4″ | .540 | .282 | 0.119 | 0.105 | 1130 |
| 3/8″ | .675 | .403 | 0.126 | 0.146 | 920 |
| 1/2″ | .840 | .526 | 0.147 | 0.213 | 850 |
| 3/4″ | 1.050 | .722 | 0.154 | 0.289 | 690 |
| 1″ | 1.315 | .936 | 0.179 | 0.424 | 630 |
| 1-1/4″ | 1.660 | 1.255 | 0.191 | 0.586 | 520 |
| 1-1/2″ | 1.900 | 1.476 | 0.200 | 0.711 | 470 |
| 2″ | 2.375 | 1.913 | 0.218 | 0.984 | 400 |
| 2-1/2″ | 2.875 | 2.290 | 0.276 | 1.500 | 420 |
| 3″ | 3.500 | 2.864 | 0.300 | 2.010 | 370 |
| 3-1/2″ | 4.000 | 3.326 | 0.318 | 2.452 | 350 |
| 4″ | 4.500 | 3.786 | 0.337 | 2.938 | 320 |
| 5″ | 5.563 | 4.768 | 0.375 | 4.078 | 290 |
| 6″ | 6.625 | 5.709 | 0.432 | 5.610 | 280 |
| 8″ | 8.625 | 7.565 | 0.500 | 8.522 | 250 |
| 10″ | 10.750 | 9.493 | 0.593 | 12.635 | 230 |
| 12″ | 12.750 | 11.294 | 0.687 | 17.384 | 230 |
| 14″ | 14.000 | 12.410 | 0.750 | 20.852 | 220 |
| 16″ | 16.000 | 14.213 | 0.843 | 26.810 | 220 |
| 18″ | 18.000 | 16.014 | 0.937 | 33.544 | 220 |
| 20″ | 20.000 | 17.814 | 1.031 | 41.047 | 220 |
| 24″ | 24.000 | 21.418 | 1.218 | 58.233 | 210 |
GF Harvel Clear™ PVC Pipe
GF Harvel Clear™ Rigid PVC piping provides a versatile, cost-effective alternative for many piping applications, particularly those where visual monitoring of processes is critical.
The benefits of rigid PVC piping are well recognized: exceptional corrosion resistance; smooth interior walls for unimpeded flow and reduced sediment buildup; non-contaminating for purity applications; fast, reliable solvent-welded connections; good pressure-bearing capability; and ease of handling and installation, to name a few.
All of these important benefits are now available in a unique product with optimum clarity. This clarity provides the all-round visibility that specialized applications demand — whether it be clean room applications, sight glass, dual-containment or various other processing applications where continuous monitoring is necessary.
- Manufactured to Schedule 40 and Schedule 80 IPS dimensions
- Full line of 1/4” through 8” GF Harvel Clear™ fittings
- Simple solvent-welded joining techniques
- Fully compatible with standard PVC pipe, fittings and valves
- Corrosion resistant
- Non-conductive
- Resists bacterial and biological activity
- Wide range of chemical resistance
- Lightweight, easy to handle and install
- Neatly boxed and packaged on-line, providing clean, scratch-free quality with every order
- Standard plain-end 10-foot lengths; belling and custom lengths available
- Lower overall installed cost than other alternatives
Other applications include:
| • Chemical Processing • Medical/Hospital Use • Electroplating • Food Processing • Dual Containment |
• Displays/Exhibits • Laboratory Applications • Environmental Applications • Cosmetics • Beverage Processing |
• Visual Test Equipment • Fish Hatcheries • Sight Glass |
Dimensions and Pressure Ratings
| Nominal Pipe Size (in) | O.D. | Average I.D. | Min. Wall | Nominal Wt./Ft. | Max. W.P. PSI** |
|---|---|---|---|---|---|
| 1/4″ | 0.540 | 0.344 | 0.088 | 0.086 | 390 |
| 3/8″ | 0.675 | 0.473 | 0.091 | 0.115 | 310 |
| 1/2″ | 0.840 | 0.602 | 0.109 | 0.170 | 300 |
| 3/4″ | 1.050 | 0.804 | 0.113 | 0.226 | 240 |
| 1″ | 1.315 | 1.029 | 0.133 | 0.333 | 220 |
| 1-1/4″ | 1.660 | 1.360 | 0.140 | 0.450 | 180 |
| 1-1/2″ | 1.900 | 1.590 | 0.145 | 0.537 | 170 |
| 2″ | 2.375 | 2.047 | 0.154 | 0.720 | 140 |
| 2-1/2″ | 2.875 | 2.445 | 0.203 | 1.136 | 150 |
| 3″ | 3.500 | 3.042 | 0.216 | 1.488 | 130 |
| 3-1/2″ | 4.000 | 3.521 | 0.226 | 1.789 | 120 |
| 4″ | 4.500 | 3.998 | 0.237 | 2.118 | 110 |
| 6″ | 6.625 | 6.031 | 0.280 | 3.733 | 90 |
| 6″ X 1/8 | 6.625 | 6.335 | 0.110 | 1.647 | 45 |
| 8″ | 8.625 | 7.942 | 0.322 | 5.619 | 80 |
| 10″ | 10.750 | 9.976 | 0.365 | 7.966 | 70 |
| 12″ | 12.750 | 11.889 | 0.406 | 10.534 | 70 |
Pipa uPVC Standart JIS AW & D
 |
 |
AW/D PROPERTIES
| Specific Gravity, g/cm³ (20°) | 1,35-1,55 | |
| Tensile Strength (σt) (20° C) | 40 Mpa | |
| Elongation (%) (20°) | 80% | |
| Longitudinal Reversion % (150°) | 5% | |
| Dichloromethane Resistance Test (16°C/20 menit) | No attack | |
| Vicat Softening Temperature (° C) | 79° | |
| Hydrostatic Pressure Test | (AW) Pressure resistance 1 min, 2,0 Mpa | No Failure |
| (D) Pressure resistance 1 min, 1,0 Mpa | No Failure | |
| Diameter | AW (10 kg/cm²) |
D (5 kg/cm²) |
OD (Non Pressure) |
|
| Nominal (inch – mm) |
Outiside (mm) |
Wall Thickness (mm) | ||
| 5/8″ – 13 | 17 | – | – | 0.7 |
| ½” – 16 | 22 | 1.6 | – | 1.0 |
| ¾” – 20 | 26 | 1.7 | – | 1.0 |
| 1″ – 25 | 32 | 1.9 | – | 1.0 |
| 1¼” – 32 | 42 | 2.2 | 1.3 | – |
| 1½” – 40 | 48 | 2.3 | 1.3 | – |
| 2″ – 50 | 60 | 2.3 | 1.3 | 1.0 |
| 2½” – 65 | 76 | 2.6 | 1.4 | 1.0 |
| 3″ – 75 | 89 | 3.0 | 1.8 | 1.0 |
| 4″ – 100 | 114 | 4.0 | 2.0 | 1.2 |
| 5″ – 125 | 140 | 5.4 | 2.6 | – |
| 6″ – 150 | 165 | 6.4 | 3.0 | – |
| 8″ – 200 | 216 | 7.5 | 4.0 | – |
| 10″ – 250 | 267 | 9.0 | 5.0 | – |
| 12″ – 300 | 318 | 11.0 | 6.2 | – |
Pipa uPVC Standart JIS VP&VU
JIS PROPERTIES
| Specific Gravity, g/cm³ (20°) | 1,35-1,46 | |
| Tensile Strength (σt) (20° C) | 47 Mpa | |
| Elongation (%) (20°) | 80% | |
| Longitudinal Reversion % (150°) | 5% | |
| Dichloromethane Resistance Test (16°C/20 menit) | No attack | |
| Vicat Softening Temperature (° C) | 76° | |
| Hydrostatic Pressure Test | (VP) Pressure resistance 1 min, 2,5 Mpa | No Failure |
| (VU) Pressure resistance 1 min, 2,0 Mpa | No Failure | |
| Diameter | VP (10 kg/cm²) |
VU (5 kg/cm²) |
|
| Nominal (inch – mm) |
Outside (mm) |
Thickness (mm) |
|
| ½” – 16 | 22 | 2.7 | – |
| ¾” – 20 | 26 | 2.7 | – |
| 1″ – 25 | 32 | 3.1 | – |
| 1¼” – 30 | 42 | 3.1 | – |
| 1½” – 40 | 48 | 3.6 | 1.8 |
| 2″ – 50 | 60 | 4.1 | 1.8 |
| 2½” – 65 | 76 | 4.1 | 2.2 |
| 3″ – 75 | 89 | 5.5 | 2.7 |
| 4″ – 100 | 114 | 6.6 | 3.1 |
| 5″ – 125 | 140 | 7.0 | 4.1 |
| 6″ – 150 | 165 | 8.9 | 5.1 |
| 8″ – 200 | 216 | 10.3 | 6.5 |
| 10″ – 250 | 267 | 12.7 | 7.8 |
| 12″ – 300 | 318 | 15.1 | 9.2 |
| 14″ – 350 | 370 | – | 10.5 |
Rucika JIS Standard dikembangkan untuk memenuhi kebutuhan instalasi pipa air di rumah maupun gedung bertingkat sejak lebih dari 30 tahun yang lalu. Pipa & sambungan Rucika JIS Standard diproduksi sesuai Standard Industri Jepang. Pipa & sambungannya menggunakan sistem sambungan lem, sangat membantu dalam hal pemasangan, sehingga membuatnya ekonomis, mudah & cepat. Sangat cocok digunakan pada instalasi pipa untuk air bersih, air limbah, drainase dan pipa udara.Rucika JIS Standardmemiliki jenjang diameter pipa yang komplit & pilihan sambungan/fitting yang sangat lengkap dengan lebih dari 250 item produk.
Pipa uPVC Standart SNI RRJ & SCJ
Rubber Ring Joint(RRJ)
Solvent Cement Joint (SCJ)
| Diameter | Thickness(mm) | |||||||
| Nominal(inch-mm) | Outside(mm) | Effective Length |
Jointing System |
S-63 | S-8 | S-10 | S-12.5 | S-16 |
| ½” – 16 ¾” – 20 |
20 25 |
4 4 |
SCJ SCJ |
1.5 1.9 |
1.2 1.5 |
1.0 1.2 |
0.8 1.0 |
0.7 1.0 |
| 1″ – 25 1 ¼” – 30 1 ½” – 40 |
32 40 50 |
4 4 4 |
SCJ SCJ SCJ |
2.4 3.0 3.7 |
1.9 2.4 3.0 |
1.6 1.9 2.4 |
1.3 1.6 2.0 |
1.0 1.3 1.6 |
| 2″ – 50 2 ½” – 65 3″ – 75 |
63 75 90 |
6 6 6 |
SCJ/RRJ SCJ/RRJ SCJ/RRJ |
4.7 5.5 6.6 |
3.8 4.5 5.4 |
3.0 3.6 4.3 |
2.4 2.9 3.5 |
2.0 2.3 2.8 |
| 4″ – 100 5″ – 125 6″ – 150 |
110 125 160 |
6 6 6 |
SCJ/RRJ SCJ/RRJ RRJ |
8.1 9.2 11.8 |
6.6. 7.4 9.5 |
5.3 6.0 7.7 |
4.2 4.8 6.2 |
3.4 3.9 4.9 |
| 8″ – 200 9″ – 225 10″ – 250 12″ – 300 14″ – 350 16″ – 400 |
200 225 250 315 355 400 |
6 6 6 6 6 6 |
RRJ RRJ RRJ RRJ RRJ RRJ |
14.7 16.6 18.4 23.2 26.1 29.4 |
11.9 13.4 14.8 18.7 21.1 23.7 |
9.6 10.8 11.9 15.0 16.9 19.1 |
7.7 8.6 9.6 12.1 13.6 15.3 |
6.2 6.9 7.7 9.7 10.9 12.3 |
| 18″ – 450 20″ – 500 24″ – 600 |
450 500 630 |
6 6 6 |
RRJ RRJ RRJ |
– – – |
26.7 9.6 – |
21.5 23.9 30.0 |
17.2 19.1 24.1 |
13.8 15.3 19.3 |
| Working Pressure (kg/cm²) |
0º – 25ºC 25º – 35ºC |
20 16 |
16 12 |
12 10 |
10 8 |
8 6 |
||
Fitting RRJ Standart SNI
 |
 |
 |
| Repair Socket | Reducer Socket Rubber Ring | Socket All Rubber Ring |
 |
 |
 |
| Reducer TEE All Rubber Ring | Tee All Rubber Ring | End Cap Rubber Ring |
 |
 |
 |
| Valve Socket Rubber Ring | Clamp Saddle | Flange Spigot |
 |
 |
 |
| Flange Adaptor | Bend Rubber Ring Spigot 11¼ °-90° | Bend All Rubber Ring 11¼ °-90° |
RUBBER RING DUO
• Dual Color (Blue & Black), mencegah terpasang terbalik
• Dual Hardness, Mencegah robek saat dipasang & Mencegah slip akibat tekanan
• Material EPDM, Tahan Bakteri
• Long Life, Hingga 50 tahun